Mono 200 W · Mono 350 W · Dual 350 W
For DC motor rotors. The Dual version controls two rotors or an Azimuth / Elevation installation.
Consoles and connections
Choose the correct version
A clear list replaces the old image. The exact rotor model determines the cable, connector, pinout and configuration.
Important: do not use a cable intended for another rotor, even if the connector appears identical.
Console list
DC or AC
Prices are shown only in the shop.
AC Mono · AC Dual
A 350 W power supply provides 24 V DC to the Mono or Dual AC Power module. The module delivers one or two 24 V AC outputs adapted to the rotor, without a dedicated mains transformer.
Supported rotors
AC and DC list
Model-specific cable, direct connection to the console and integrated network control.
AC rotors
Controlled by the AC Power module, powered from 24 V DC, with a 24 V AC motor output.
BrandFamilyCompatible modelsConnection
Yaesu
G-400 / G-450
G-400RCG-450AG-450CG-450XL
AC Power module · adapted cable
Yaesu
G-600 / G-650
G-600G-600RCG-650AG-650CG-650RC
AC Power module · adapted cable
Kenpro
KR AC
KR-400KR-400RCKR-600KR-600RCKR-650XL
AC Power module · adapted cable
Hy-Gain
HAM / Tailtwister
AC Power module · dedicated cable and configuration
DC rotors
Direct-current control. Voltage and cable are prepared for the exact rotor model.
BrandFamilyCompatible modelsConnection
Prosistel
12 VDC
PST-641DPST-2051DPST-2051D-PROPST-61DPST-61D-PRO
3-wire potentiometer feedback
Prosistel
24 VDC
PST-71DPST-71D-PROPST-110D-PROPST-110D-PRO-HP
3-wire potentiometer feedback
Yaesu
G-450 DC
G-450DCG-450ADCG-450CDC
18 V DC
Yaesu
DXA / DXC
G-800DXAG-800DXCG-1000DXAG-1000DXCG-2800DXAG-2800DXC
Variable 11–24 V DC · adapted cable
Yaesu
Earlier generation
G-800SG-800SDXG-1000SG-1000SDX
DC control · adapted cable
Kenpro
Earlier generation
KR-800SKR-800SDXKR-1000SKR-1000SDX
DC control · adapted cable
Available connection types
- Rotor ↔ console: cable and connector adapted to the pinout
- Network: RJ45 LAN as standard or Wi-Fi
- Software: direct UDP and compatible protocols, with no mandatory third-party software
View compatible 12 / 24 V Prosistel models
3-wire potentiometer available
Prosistel 12 VDC / 24 VDC
Motor control, wiring, protection and feedback are supported on versions fitted with a 3-wire potentiometer.
Models with 3-wire potentiometer
PST-641DPST-2051DPST-2051D-PROPST-61DPST-61D-PRO
Models with 3-wire potentiometer
PST-71DPST-71D-PROPST-110D-PROPST-110D-PRO-HP
Please note: Prosistel versions with a 5-wire Hall sensor are not ready and are not currently offered.
Computer control
Radio software and networking
View protocols and software
PST Rotator and loggers
Compatibility with existing radio software is retained according to the protocol in use.
GS-232 / TCP
Network commands allow integration with compatible tools and radio loggers.
Direct UDP
The Dual model controls Azimuth / Elevation directly over UDP, with no mandatory third-party software.