Azimut One Mono 200 W
The simple and complete version for one 24 V rotor.
- 1 rotor output
- 24 V motor output — 200 W
- 115 V AC or 230 V AC mains input
- 7-inch touchscreen
- Wi-Fi + RJ45 LAN as standard
- RS485 link as standard
Azimut One range
DC and AC consoles
Three DC configurations and two AC configurations, Mono or Dual, prepared for the exact model of your rotor.
RJ45 LAN as standard
RS485 as standard
Direct UDP
Az / El operational
Azimut One Mono 350 W
Extra power reserve for more demanding rotors.
- 1 rotor output
- 24 V motor output — 350 W
- 115 V AC or 230 V AC mains input
- 7-inch touchscreen
- Wi-Fi + RJ45 LAN as standard
- RS485 link as standard
Azimut One Dual 350 W
Two operational outputs for two rotors or an Az / El installation.
- 2 rotor outputs
- 24 V motor output — 350 W
- 115 V AC or 230 V AC mains input
- Operational Azimuth / Elevation
- Direct UDP control
- Standard RS485 link dedicated to the compass
Expansion available on the latest RS485-compatible DC Mono 200 W, Mono 350 W and Dual 350 W versions: built-in display, remote, screenless Light and compass bundles: a second Dual RS485 board adds AUX and antenna-switch control. Installed, configured and tested option: €49 incl. VAT. DUAL RS485 I2C board sold separately: €34.90 incl. VAT.
Prosistel: 12 V and 24 V models with 3-wire potentiometer feedback are supported. The 5-wire Hall-sensor versions are not available yet.
AC range available
Mono or Dual, depending on the installation
Both versions use a 350 W 24 V DC power supply and an AC Power module that generates the 24 V AC output for the rotor, without a dedicated mains transformer.
Azimut One AC Mono
The 350 W power supply provides 24 V DC to the Mono AC Power module, which delivers one 24 V AC output adapted to the rotor.
- 1 AC rotor output
- 7-inch touchscreen
- Wi-Fi, RJ45 LAN and direct UDP
- RS485 link as standard
- Status LEDs and manual control
Azimut One AC Dual
The 350 W power supply provides 24 V DC to the Dual AC Power module, which delivers two independent 24 V AC outputs.
- 2 AC rotor outputs
- Azimuth / Elevation or two rotors
- Wi-Fi, RJ45 LAN and direct UDP
- RS485 link as standard
- Status LEDs and manual controls
Yaesu G-450C / G-450AYaesu G-600 / G-600RCYaesu G-650C / G-650RC / G-1000CKenpro KR-400 / KR-400RCKenpro KR-600 / KR-600RC / KR-650XLYaesu G-2000RCHy-Gain HAM-IVHy-Gain HAM-VTailtwister T2XOther models after technical validation
Important: specify the exact rotor reference when ordering. The pinout is not identical across models.
Shared equipment
Independent and protected operation
View technical functions
Position feedback
Uses the original potentiometer when operational. The AS5600 sensor remains an optional solution.
Overlap and protection
360° travel, overlap up to 60° on one side or 45° on both sides. The LED remains steady during movement and a red badge marks the overlap zone.
115 / 230 V mains versions
The applicable consoles can be prepared for either 115 V AC or 230 V AC mains input. The voltage is selected with the order request.
Network connection
Wi-Fi and RJ45 LAN included. LAN remains the priority connection, while backup Wi-Fi provides Web access and official updates without a cable.
Independent dual rotor
Separate R1/R2 calibration on ADS1115 A0/A1. Antennas, colors and six M1–M6 memories are configured per rotor.
Remembered last view
On the dual version, the console returns after restart to the last selected view: Rotor 1, Rotor 2 or Dual.
Touch controls
Short arrow tap: exact 1° step. Hold: continuous rotation. Release: immediate stop.
Smoother movement
Progressive acceleration over the first 10 degrees, braking over the last 10 and no more than one fine correction.
Dedicated mobile page
R1/R2 selection, control, calibration and clearing for the chosen rotor, with a safe stop when switching axes.
RS485 remote display
The touchscreen can be installed away from the control and power unit. On the latest RS485-compatible remote DC versions, the standard link serves the intended equipment. An additional Dual RS485 board is available for €49 incl. VAT for AUX and the switch. The unit retains its LED indicators and manual button.
Interface preview
